If I type the name Morgan in to the subject name the file name changes correctly but when I hit start ML freezes. Any ideas? Name has been used previously in the YYYYMODATTTTsubjectname.mat format. I can type a zero for the o in Morgan and it works fine. Current version of ML 2021b v3 Matlab. Is there a corrupt file I can up date?by jbergman - Questions and Answers
I wound up imaging the working install back to the other computer. Even a clean bare metal install of windows did not work. I suspect that while the computers are identical, windows was installing different hardware drivers on each. I noticed the sound drivers were not identical versions.by jbergman - Questions and Answers
No joy on cleaning up the system. Removed old versions in appdata, uninstalled and reinstalled. Still get the Brace error. Using ML 2.2.29 on Matlab R2022a.4. Any additional thoughts before I reinstall windows 10?by jbergman - Questions and Answers
DNMS starts normally but has this error after the start target is touched. Matlab 2022a and Matlab 2021a with MonkeyLogic July5 2022 . But only on one of 2 identical lenovo laptops. Not sure where this error actually comes from.by jbergman - Questions and Answers
Error is unable to resolve the name daq.getToolboxInfo. Monkey logic won't start. Does not always happen. Sometimes closing Matlab and restarting just Matlab works. Win 10 19044.1586. Recently installed Matlab 2021b update3. Any thoughts? Joeby jbergman - Questions and Answers
Our research is looking for a progressive ratio test for training. Does anyone have a running code for this? I have not seen this aside from a Lafayette system implementation. Cheers.by jbergman - Questions and Answers
Resetting the audio file worked well. One file was very short and must have gone EOF. The other .wav file performed as you described. Odd to have an EOF stimuli not reset when recalled but resetting was the answer. Thank you more than you can imagine. Thanksby jbergman - Questions and Answers
I am having a problem with a Delayed recognition span test possibly related to stacking scenes. Particularly with a concurrent scene. Any assistance would be appreciated. I'll attach the code but I am clipping the main loop to annotate the parts that fail or fail after the 4 th loop. I have been reading code for 40 years but not much experience with Matlab. Thanks. Current software Matlab 2by jbergman - Questions and Answers
Just tested the latest build and that has fixed the issue. The research team thanks you! Joeby jbergman - Questions and Answers
Attached is the requested file. Hope it clears up the issue. Thanks very much. Joeby jbergman - Questions and Answers
I'll post results tomorrow as I just left my shop. Thanks for the help. Joeby jbergman - Questions and Answers
This display is the one Lafayette uses for their AbetII product. The IR touch ( connected via usb) itself does work as a windows HID device. I can drag, select, etc in the windows desktop, web browsers and other applications. Just not under MatLab. I could try ML 2.0 but I have not run this system under Win 7. The product is a Nexio Nex104 . I have not used this product with ML before so its a neby jbergman - Questions and Answers
I have a 10inch INexio USB IR touch interface on a 10 inch Nexio screen. Touch, click and drag work in windows. Windows 10 sees the device correctly according to the examples. When I run ML (current ver. 10/27) on MatLab 2018b, the first touch is seen as a start experiment correctly. The touch stops responding and a hand icon on the experimenters screen stays at the inital "Start" pictuby jbergman - Questions and Answers
I'll recheck the board connections as they are on a bread board layout and the ttl wires maybe getting loosely connected. The code from setup loads via usb fine with no errors though. The bluetooth is not actually connected till data is sent via ML serial write, then it connects, that is what seems to be the timeout. I have to bring my logic scope home to verify the status of the hc-05. Worby jbergman - Questions and Answers
Bluetooth device seems not to init correctly on program run, it acts like a timeout issue. The device does eventually connect as its led beacon changes to a slow(connected) flash rate, but ML 2.2.12 returns a device not ready. So to be clear it is a BT device at 38k baud parity and stop are correct. Arduino is setup with the packaged code from this site. Anywhere else to look? Stumped.by jbergman - Questions and Answers