* Changes in NIMH MonkeyLogic 2 (Mar 16, 2020)
+ You can adjust the transparency of overlaid webcam videos in mlplayer.
- mlsetpath introduced in Feb 3, 2020 did not process relative paths correctly
and therefore caused an error when reading stimuli sometimes. It is fixed
now.
- If 'clear all' was executed while the NIMH ML main windows was open and then
a task was started right away, eye tracers were not displayed. It is fixed.
(Thanks to Carlos Ponce)
* Changes in NIMH MonkeyLogic 2 (Mar 9, 2020)
+ When more than one NI board is installed, one of them can be run at an
arbitrary sample rate (possibly faster than 1 kHz). Choose the device to
run fast in the Other device settings and assign the channels to
"High Frequency" in the I/O menu. To read "High Frequency" signals from the
data file, use the mlreadsignal function.
https://monkeylogic.nimh.nih.gov/docs_MainMenu.html#OtherDeviceSettings
https://monkeylogic.nimh.nih.gov/docs_RuntimeFunctions.html#mlreadsignal
+ Voice recording also produces large data and sometimes causes an
out-of-memory error when loaded all at once. To prevent it, now the signal
is stored as a separate variable, not in AnalogData.Voice, and should be
read with the mlreadsignal function.
https://monkeylogic.nimh.nih.gov/docs_RuntimeFunctions.html#mlreadsignal
+ The mlreadwebcam function is integrated into mlreadsignal.
https://monkeylogic.nimh.nih.gov/docs_RuntimeFunctions.html#mlreadsignal
- mglpngwrite is rewritten to process double-type image matrices correctly.
(Thanks to Camillo Padoa-Schioppa)
- The problem that the last two versions did not detect stimulus files with
an uppercase extension is fixed. (Thanks to Carlos Ponce)
- The photodiode tuner can handle signal input with reversed polarity now.
(Thanks to Mitch and RN8JR from the NIMH ML forum)
- In some tasks written with the scene framework, a trial was not correctly
replayed by mlplayer from the second run. It is fixed now.